| PART |
Description |
Maker |
| 44242-0001 44242-0002 44242-0003 44242-0004 44242- |
Micro-Fit 3.0垄芒 Test Plugs Won隆炉t Damage Mating Contact
Micro-Fit 3.0 Test Plugs Won’t Damage Mating Contact
|
Molex Electronics Ltd.
|
| BS4200Q-C |
Eliminates overvoltage caused by fast rising transients
|
Shenzhen Bencent Electr...
|
| BS0060U-2G |
Eliminates overvoltage caused by fast rising transients
|
Shenzhen Bencent Electr...
|
| BS0060N-C-F |
Eliminates overvoltage caused by fast rising transients
|
Shenzhen Bencent Electr...
|
| BS8000N-C-F |
Eliminates overvoltage caused by fast rising transients
|
Shenzhen Bencent Electr...
|
| 4171900XX-3 |
Eliminates film judder and reduces blur caused by latent
|
List of Unclassifed Manufac...
|
| HD64F3437STF16 HD64F3437TF16 HD64F3434TFLH16 HD64F |
12 V must not be applied to the S-mask model (single-power-supply specification), as this may permanently damage the device.
|
HITACHI[Hitachi Semiconductor]
|
| HD6433434F12 HD6433434F16 HD6433434TF12 HD6433434T |
12 V must not be applied to the S-mask model (single-power-supply specification), as this may permanently damage the device.
|
Hitachi Semiconductor
|
| Z4GP210-HF |
Lead less chip form, no lead damage, Low power loss, High efficiency
Halogen Free Bridge Rectifiers, V<sub>RRM</sub>=1000V, V<sub>DC</sub>=1000V, I<sub>AV</sub>=2A
|
Comchip Technology
|
| TC4432EPA TC4431_03 TC4431CJA TC4431COA TC4431COA7 |
The TC4431/4432 are 30V CMOS buffer/drivers suitable for use in high-side driver applications. They will not latch up under any conditions within their power and voltage ratings. They can accept, without damage or logic upset, up to 300mA
1.5A High-Speed 30V MOSFET Drivers
|
MICROCHIP[Microchip Technology]
|
| TC1413 TC1413N TC1413NCOA TC1413NCOA713 TC1413NEUA |
3A High-Speed MOSFET Drivers
The TC1413/1413N are 3A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. ...
The TC1413/1413N are 3A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity that occurs on the ground pin
|
http://
Microchip
|
